IPhone 11: Difference between revisions

Revision as of 22:31, 29 May 2025

This article is a stub. You can help Repair Wiki grow by expanding it

	Type	Difficulty
Parts that are serialized on iPhones	Troubleshooting/Diagnostics
Which iPhones Will Boot With Top Board Only	Troubleshooting/Diagnostics	1. Easy

	Affects part	Type	Difficulty
Diagnosing iPhone “No IMEI / No Service” via RFFE Bus Analysis with ESP32	Main Logic Board	Soldering	3. Hard
How To Fix an iPhone 11 That Randomly Restarts	Main Logic Board	Part replacement	1. Easy
How To Recover Original Sysconfig Data from iPhone	Main Logic Board NAND	Soldering	4. Specialist
How To Repair an iPhone 11 that is bootlooping	Main Logic Board	Soldering	3. Hard
How To Replace iPhone Front Camera Without Loosing FACE ID	TrueDepth Camera Assembly		3. Hard
How to fix iPhone 11 stuck in recovery mode with failed at Rose Error -1	Main Logic Board	Soldering	4. Specialist
How to repair iPhone 11 Dead Not Charging	Logic Board CPU	Soldering	4. Specialist
IPhone 11 Always Searching for Network IMEI Present	Motherboard	Soldering	3. Hard
IPhone 11 No Cellular Service, No IMEI Present	Motherboard	Soldering	3. Hard
IPhone 11 Not Powering on, 2A or Higher Power Draw After Prompt to Boot	Motherboard	Soldering	3. Hard
IPhone 11 Not Powering on, After Prompt to Boot Current Jumps Back and Forth From 0 A to 320 mA, Then 0 A to 1.4 A, Then 0 A to 500 mA, and so on	Main Logic Board	Soldering	3. Hard
IPhone 11 with half backlight on display	Motherboard	Soldering	3. Hard
IPhone X - 12 Pro Max Fix A problem was detected with the TrueDepth camera	Dot Projector		2. Medium

You can manually link to external sources for additional information that might not fit here but are useful such as BIOS image dumps, firmware, etc!

@@ Line 20: / Line 20: @@
 File:A13 soc dieshot.jpg|Dieshot of A13 SOC on Base Board PCB
 File:I11 schematic.png|Schematic of an iPhone 11
+File:Iphone 11 component location.jpeg|alt=
 </gallery>