More actions
| IPhone 6 Plus | |
|---|---|
| Manufacturer | Apple |
| Code name | A1522, A1524, A1593 |
| Release date | 2014-09-19 |
| Device type | Phone |
This article is a stub. You can help Repair Wiki grow by expanding it
Guides
Explanatory Guides
| Type | Difficulty | |
|---|---|---|
| Parts that are serialized on iPhones | Troubleshooting/Diagnostics |
Repair Guides
| Affects part | Type | Difficulty | |
|---|---|---|---|
| IPhone 6 Plus Boots to recovery mode iTunes Error 9 | Motherboard | Soldering | 4. Specialist |
| IPhone 6 Plus Touch Disease | Motherboard | Soldering | 3. Hard |
Create a Guide
Device pictures
PCB pictures
Reference measurements (also schematics if available)
-
iPhone 6 Plus display connector. Top right goes to top of the board, under the rear camera.
-
iPhone 6 Plus touch connector. Top right goes to top of the board, under the camera.
-
iPhone 6 Plus charge port / dock flex connector. Bottom left goes to edge of the board, next to bottom of the battery.
-
iPhone 6 Plus home button connector. Top left corner goes to top right of the board, under the rear camera.
-
iPhone 6 Plus rear camera connector. Top right goes to top of the board, under the rear camera
-
iPhone 6 Plus front camera, proximity sensor, ambient light sensor, earspeaker connector. Top right goes to top edge of the board, under the rear camera.
More Information/External Sources
You can manually link to external sources for additional information that might not fit here but are useful such as BIOS image dumps, firmware, etc!