| Nintendo Switch Drawing between 0.07a and 0.15a from charger Repair | |
|---|---|
| Device | Nintendo Switch |
| Affects part(s) | Charging circuit |
| Needs equipment | multimeter, soldering iron, soldering station |
| Difficulty | ◉◉◉◌ Hard |
| Type | Soldering |
This article is a stub. You can help Repair Wiki grow by expanding it
Problem description
Repairing a Nintendo Switch that draws between 0.07a and 0.15a from charger.
Symptoms
- Drawing between 0.07a and 0.15a from charger
Solution
M92T36 has shorted components. Replace M92T36 and charging port for good measure