Raspberry Pi PWR LED illuminates, but doesn't turn on or faint buzzing when connected to power Repair: Difference between revisions
From Repair Wiki
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
{{Repair Guide | {{Repair Guide | ||
|Device=Raspberry Pi | |Device=Raspberry Pi | ||
|Affects parts= | |Affects parts=Main Logic Board | ||
|Needs equipment= | |Needs equipment=multimeter, soldering iron, soldering station | ||
|Type= | |Type=Soldering | ||
|Difficulty= | |Difficulty=3. Hard | ||
}} | }} | ||
{{stub}} | |||
==Problem description== | ==Problem description== | ||
PWR LED illuminates but doesn't turn on or faint buzzing when connected to power supply. Missing voltages at a GPIO pin. | PWR LED illuminates but doesn't turn on or faint buzzing when connected to power supply. Missing voltages at a GPIO pin. | ||
Revision as of 20:53, 13 January 2024
| Raspberry Pi PWR LED illuminates, but doesn't turn on or faint buzzing when connected to power Repair | |
|---|---|
| Device | Raspberry Pi |
| Affects part(s) | Main Logic Board |
| Needs equipment | multimeter, soldering iron, soldering station |
| Difficulty | ◉◉◉◌ Hard |
| Type | Soldering |
This article is a stub. You can help Repair Wiki grow by expanding it
Problem description
PWR LED illuminates but doesn't turn on or faint buzzing when connected to power supply. Missing voltages at a GPIO pin.
- Pi 3 (A+ and B+)
- Pi 4 (all)
Symptoms
- The red PWR LED illuminates, but the system doesn't turn on.
- There is a faint buzzing sound when power is supplied to the PCB.
- 5V present at GPIO 2, but no 3.3V on GPIO 1.