Nintendo Switch Drawing between 0.07a and 0.15a from charger Repair: Difference between revisions
From Repair Wiki
No edit summary |
No edit summary |
||
| Line 2: | Line 2: | ||
|Device=Nintendo Switch | |Device=Nintendo Switch | ||
|Affects parts=Charging circuit | |Affects parts=Charging circuit | ||
|Needs equipment=multimeter, soldering iron, soldering station | |||
|Type=Soldering | |Type=Soldering | ||
|Difficulty=3. Hard | |Difficulty=3. Hard | ||
Latest revision as of 20:33, 13 January 2024
| Nintendo Switch Drawing between 0.07a and 0.15a from charger Repair | |
|---|---|
| Device | Nintendo Switch |
| Affects part(s) | Charging circuit |
| Needs equipment | multimeter, soldering iron, soldering station |
| Difficulty | ◉◉◉◌ Hard |
| Type | Soldering |
This article is a stub. You can help Repair Wiki grow by expanding it
Problem description
Repairing a Nintendo Switch that draws between 0.07a and 0.15a from charger.
Symptoms
- Drawing between 0.07a and 0.15a from charger
Solution
M92T36 has shorted components. Replace M92T36 and charging port for good measure