Nintendo Switch Drawing between 0.07a and 0.15a from charger Repair: Difference between revisions
From Repair Wiki
HaileyKitty (talk | contribs) (Created page migrate) |
No edit summary |
||
(2 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
{{Repair Guide | {{Repair Guide | ||
|Device=Nintendo Switch | |Device=Nintendo Switch | ||
|Affects parts= | |Affects parts=Charging circuit | ||
|Needs equipment= | |Needs equipment=multimeter, soldering iron, soldering station | ||
|Type= | |Type=Soldering | ||
|Difficulty= | |Difficulty=3. Hard | ||
}} | }} | ||
{{stub}} | |||
==Problem description== | ==Problem description== | ||
Repairing a Nintendo Switch that draws between 0.07a and 0.15a from charger. | |||
[[File:Placeholder image.jpg|thumb|Example image (Figure 1) -- No image yet. Help expand this page by uploading it!]] | [[File:Placeholder image.jpg|thumb|Example image (Figure 1) -- No image yet. Help expand this page by uploading it!]] | ||
==Symptoms== | ==Symptoms== | ||
Line 15: | Line 16: | ||
==Solution== | ==Solution== | ||
M92T36 has shorted components. Replace M92T36 and charging port for good measure | |||
Latest revision as of 20:33, 13 January 2024
Nintendo Switch Drawing between 0.07a and 0.15a from charger Repair | |
---|---|
Device | Nintendo Switch |
Affects part(s) | Charging circuit |
Needs equipment | multimeter, soldering iron, soldering station |
Difficulty | ◉◉◉◌ Hard |
Type | Soldering |
This article is a stub. You can help Repair Wiki grow by expanding it
Problem description
Repairing a Nintendo Switch that draws between 0.07a and 0.15a from charger.
Symptoms
- Drawing between 0.07a and 0.15a from charger
Solution
M92T36 has shorted components. Replace M92T36 and charging port for good measure