Nintendo Switch CC1/CC2 lines are shorted to ground after replacing the M92T36 IC and connecting the Switch charger Repair: Difference between revisions
From Repair Wiki
More actions
HaileyKitty (talk | contribs) (Created from migrating) |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
{{Repair Guide|Device=Nintendo Switch}} | {{Repair Guide | ||
|Device=Nintendo Switch | |||
|Affects parts=Main Logic Board | |||
|Needs equipment=multimeter, soldering iron, soldering station | |||
|Type=Soldering | |||
|Difficulty=3. Hard | |||
}} | |||
{{stub}} | |||
==Problem description== | |||
CC1/CC2 lines measure less than 10 ohms to GND after replacing the M92T36 IC and connecting the Switch charger | |||
== Symptoms== | |||
*Sub 10 Ohms to GND on the CC1/CC2 lines | |||
CC1/CC2 lines | |||
== | ==Solution== | ||
Replace the 3v3 buck converter IC (next to the Audio IC) Source: https://gbatemp.net/threads/fried-multiple-m92t36.572667/ | |||
Latest revision as of 16:27, 13 January 2024
| Nintendo Switch CC1/CC2 lines are shorted to ground after replacing the M92T36 IC and connecting the Switch charger Repair | |
|---|---|
| Device | Nintendo Switch |
| Affects part(s) | Main Logic Board |
| Needs equipment | multimeter, soldering iron, soldering station |
| Difficulty | ◉◉◉◌ Hard |
| Type | Soldering |
This article is a stub. You can help Repair Wiki grow by expanding it
Problem description
CC1/CC2 lines measure less than 10 ohms to GND after replacing the M92T36 IC and connecting the Switch charger
Symptoms
- Sub 10 Ohms to GND on the CC1/CC2 lines
Solution
Replace the 3v3 buck converter IC (next to the Audio IC) Source: https://gbatemp.net/threads/fried-multiple-m92t36.572667/