IPhone 6: Difference between revisions

IPhone 6
Manufacturer	Apple
Code name	A1549, A1586, A1589
Release date	2014-09-19
Device type	Phone

VisualWikitext

Latest revision as of 19:48, 27 June 2024

This article is a stub. You can help Repair Wiki grow by expanding it

Guides

Explanatory Guides

Repair Guides

	Affects part	Type	Difficulty
IPhone 6 boots to Apple logo and turns back off fix	Software	Software	1. Easy

Create a Guide

Device pictures

PCB pictures

front side PCB source
back side PCB source

Reference measurements (also schematics if available)

Diode mode for iPhone 6 Display connector. Top Right goes to top edge of the board, under the rear camera.
iPhone 6 Touch connector. Top right goes to top edge of the board.
iPhone 6 battery connector. Bottom left goes to the edge of the board, next to the bottom of the battery.
iPhone 6 charge port / dockflex connector diode mode readings. Bottom right goes to bottom of the phone, where the loudspeaker is.
iPhone 6 home button / TouchID connector. Top right goes to the top of the board, under the rear camera.
iPhone 6 rear camera connector. Top right goes to the top of the board, under the rear camera.
iPhone 6 front flex connector. Contains front camera, proximity sensor, ambient light sensor, earspeaker. Top right goes to top of the board, under the rear camera.
iPhone 6 Volume, power buttons, ringer switch and flaslight connector. Top left goes to top edge of the board, next to the mute/ringer switch.

More Information/External Sources

You can manually link to external sources for additional information that might not fit here but are useful such as BIOS image dumps, firmware, etc!

@@ Line 1: / Line 1: @@
-{{stub}}
 {{Device page
+|Manufacturer=Apple
+|Has code name=A1549, A1586, A1589
+|Device release date=2014-09-19
+|Device type=Phone
 }}
+{{stub}}
 ==Guides==
@@ Line 8: / Line 13: @@
 ==Device pictures==
 <gallery showthumbnails="1">
-File:Example device pictures.jpg
+File:111940 SP705-iphone 6-mul.png
 </gallery>
 ==PCB pictures==
 <gallery showthumbnails="1">
-File:Example pcb pictures.jpg
+File:Iphone6-Pcb-front-view-sized.jpg|front side PCB [https://www.eeworldonline.com/teardown-an-oldie-but-still-useful-the-iphone-6/ source]
+File:Iphone6-Pcb-backside-sized.jpg|back side PCB [https://www.eeworldonline.com/teardown-an-oldie-but-still-useful-the-iphone-6/ source]
 </gallery>
 ==Reference measurements (also schematics if available)==
 <gallery showthumbnails="1">
-File:Example measurement pictures.jpg
+File:6 LCM J2019 DiodeMode.png|Diode mode for iPhone 6 Display connector. Top Right goes to top edge of the board, under the rear camera.
+File:6 Touch J2401 DiodeMode.png|iPhone 6 Touch connector. Top right goes to top edge of the board.
+File:6 Batt conn diodeMode.jpg|iPhone 6 battery connector. Bottom left goes to the edge of the board, next to the bottom of the battery.
+File:6 DockFlex J1817 DiodeMode.png|iPhone 6 charge port / dockflex connector diode mode readings. Bottom right goes to bottom of the phone, where the loudspeaker is.
+File:HomeButton TouchID J2118.jpg|iPhone 6 home button / TouchID connector. Top right goes to the top of the board, under the rear camera.
+File:6 RearCam J2321 DiodeMode.png|iPhone 6 rear camera connector. Top right goes to the top of the board, under the rear camera.
+File:6 FrontFlex J1111 DiodeMode.png|iPhone 6 front flex connector. Contains front camera, proximity sensor, ambient light sensor, earspeaker. Top right goes to top of the board, under the rear camera.
+File:6 HoldVolFlex J0801 J0802 DiodeMode.png|iPhone 6 Volume, power buttons, ringer switch and flaslight connector. Top left goes to top edge of the board, next to the mute/ringer switch.
 </gallery>
 ==More Information/External Sources==
 You can manually link to external sources for additional information that might not fit here but are useful such as BIOS image dumps, firmware, etc!