(Created page with "{{stub}} {{Repair Guide |Device= |Affects parts= |Needs equipment= |Type= |Difficulty= }} ==Problem description== Repairing an issue with the iPhone 6 that boots into the Apple logo and then turns off ==Symptoms== * Turns on and shows the Apple logo for roughly 2 minutes and 10 seconds, then turns back off. * Does not turn back on by itself (not a boot loop). * Turns on without being plugged in and draws current when both on/off (not a battery issue). * Does not show up...") |
No edit summary |
||
Line 1: | Line 1: | ||
{{Repair Guide | {{Repair Guide | ||
|Device= | |Device=IPhone 6 | ||
|Affects parts= | |Affects parts=Software | ||
|Needs equipment= | |Needs equipment=Apple computer | ||
|Type= | |Type=Software | ||
|Difficulty= | |Difficulty=1. Easy | ||
}} | }} | ||
{{stub}} | |||
==Problem description== | ==Problem description== | ||
Repairing an issue with the iPhone 6 that boots into the Apple logo and then turns off | Repairing an issue with the iPhone 6 that boots into the Apple logo and then turns off |
Latest revision as of 19:35, 27 June 2024
IPhone 6 boots to Apple logo and turns back off fix | |
---|---|
Device | IPhone 6 |
Affects part(s) | Software |
Needs equipment | Apple computer |
Difficulty | ◉◌◌◌ Easy |
Type | Software |
This article is a stub. You can help Repair Wiki grow by expanding it
Problem description
Repairing an issue with the iPhone 6 that boots into the Apple logo and then turns off
Symptoms
- Turns on and shows the Apple logo for roughly 2 minutes and 10 seconds, then turns back off.
- Does not turn back on by itself (not a boot loop).
- Turns on without being plugged in and draws current when both on/off (not a battery issue).
- Does not show up in iTunes EXCEPT when placing it in DFU mode.
- In DFU mode, the serial number of the iPhone shows as NA in iTunes.
Solution
- Put it in recovery mode:
- Plug the phone in to turn it on.
- Hold the home button down until recovery mode is entered (this can take minutes). Letting go any earlier would cause it to turn off instead of entering recovery mode.
- After entering recovery mode, the iTunes logo with the data cable icon appears on the screen. The phone can then be recognized in iTunes to continue with restore or upgrade.