PS4 UART Guide
Jump to navigation
Jump to search
You are not logged in. Your IP address will be publicly visible if you make any edits. If you
create an account
, your edits will be attributed to your username, along with other benefits.
Anti-spam check. Do
fill this in!
==Soldering UART Pins== The only 2 pins you will need to solder is '''Ground''', and '''TX'''. Before you start, ensure that the TX pin on your PS4 is indeed getting 3.3v on start up. '''<big>If your USB TTL has jumpers, ensure that it is set to 3.3v.</big>''' Attach or solder the ground and TX lines to the USB TTL and plug it into your computer. Do not use cable that is too thick or too thin. I generally just use jumper wires as they are easy to plug into the USB TTL device.<li style="display: inline-block; vertical-align: top;">[[File:Sac001uartpoints.jpg|200px|thumb|left|UART pins for SAC-001]]</li> <li style="display: inline-block; vertical-align: top;">[[File:Nvg-002.jpg|thumb|UART pins for NVG-002]][[File:Sae-004uart.jpg|200px|thumb|left|UART pins for SAE-004]]</li> <li style="display: inline-block; vertical-align: top;">[[File:saa001uart.jpg|200px|thumb|left|UART pins for SAA-001]]</li>
Please note that all contributions to Repair Wiki are considered to be released under the a Creative Commons Attribution-ShareAlike 3.0 License (see
for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource.
Do not submit copyrighted work without permission!
To protect the wiki against automated edit spam, we kindly ask you to solve the following hCaptcha:
(opens in new window)
Retrieved from "
Not logged in
Visual inspection for logic board repairs
Detecting Short Circuits
How to Clean a Motherboard
What links here