MacBook Pro A2338 Not turning on, current draw cycling between 0.00 and 0.45a at 5V repair
From Repair Wiki
MacBook Pro A2338 Not turning on, current draw cycling between 0.00 and 0.45a at 5V repair | |
---|---|
Device | MacBook Pro A2338 |
Affects part(s) | Motherboard |
Needs equipment | multimeter, soldering iron, soldering station |
Difficulty | ◉◉◉◌ Hard |
Type | Soldering, Micro-Soldering"Micro-Soldering" is not in the list (Soldering, Teardown, Part replacement, Cleaning, Software, BGA, General) of allowed values for the "Repair Guide type" property. |
Problem description
Provide a concise description of the issue here. Be as specific as possible to help readers quickly determine whether or not this is the exact problem they are facing.
Symptoms
Detail all measurable or observable symptoms in this section.
- Symptom 1 (Figure 1)
- Symptom 2
Solution
If the issue has a single, specific solution, provide it in this section and delete the sub-headers below. Otherwise, if there are multiple potential causes for the problem, outline the process of identifying the root cause and offer corresponding solutions below.