How To Fix an iPhone 7 Stuck In DFU Mode. iTunes Error Code 4014: Difference between revisions
From Repair Wiki
(How to fix iPhone 7 error 4014) |
No edit summary |
||
| Line 1: | Line 1: | ||
{{Repair Guide | {{Repair Guide | ||
|Device= | |Device=iPhone 7, IPhone 7 Plus | ||
|Affects parts= | |Affects parts=Main Logic Board | ||
|Needs equipment= | |Needs equipment=Soldering Iron, Hot Air Station, Microscope | ||
|Type= | |Type=BGA, Soldering | ||
|Difficulty= | |Difficulty=3. Hard | ||
}} | }} | ||
{{stub}} | |||
==Problem description== | ==Problem description== | ||
How to fix an iPhone 7 that is stuck in DFU Mode. When you try to flash an update or restore, it will fail with Error 4014. | How to fix an iPhone 7 that is stuck in DFU Mode. When you try to flash an update or restore, it will fail with Error 4014. | ||
Latest revision as of 06:45, 25 January 2024
| How To Fix an iPhone 7 Stuck In DFU Mode. iTunes Error Code 4014 | |
|---|---|
| Device | iPhone 7, IPhone 7 Plus |
| Affects part(s) | Main Logic Board |
| Needs equipment | Soldering Iron, Hot Air Station, Microscope |
| Difficulty | ◉◉◉◌ Hard |
| Type | BGA, Soldering |
This article is a stub. You can help Repair Wiki grow by expanding it
Problem description
How to fix an iPhone 7 that is stuck in DFU Mode. When you try to flash an update or restore, it will fail with Error 4014.
Symptoms
- You get no image from the screen
- You plug into computer and iTunes/3U tools detects it in DFU mode
- If you try to Update or Restore, you get these results:
- iTunes Error Code: Error 401
- 3u Tools Easy Flash: Fails at 19%
Solution
Error 4014 is usually "NAND not detected".
- Check the caps around NAND to see if they're shorted.
- If there's a short, remove the shorted cap and try to boot the phone up.
- If no short, pull the NAND and connect it to the JC P7 NAND programmer and see if it's readable
- If it doesn't read, the NAND is dead and needs to be replaced
- If it does read a NAND, then you can reball NAND and install it again. The phone should boot right up.