Pixel Fingerprint Calibration

Google Pixel added the in-display fingerprint sensor with the Pixel 6 in 2021. The scanner is built right into the screen, giving the phone a sleeker look. Since it’s part of the display, the sensor needs calibration to work properly. Also, when a new screen is installed, or even when a display is pulled from a donor phone, it needs to be recalibrated to ensure it works accurately

HERE is a quick Guide to Re-Calibrate

• install new display and test it
• Power Off Pixel and wait 10 sec
• Press and Hold Volume - Down, Power Button until Fastboot Screen appear
• Release the keys and Go-to This Page
• Click "Connect Device" again click on "Connect" in new prompt with name of Your Device
• After That Click on "install Software" and Wait for Download and install

• Pixel will Power on itself ones done please do a Manual Restart To Complete the Procedure

Visual Guide

• 

  FastBoot Guide

• 

  FastBoot Screen Do Not Click any Key on Phone

• 

  New Page Guide

• 

  Connect Guide

• 

  install guide

• 

  Fingerprint Data Been Written

• 

  must to do step