More actions
HaileyKitty (talk | contribs) (Created from migrating) |
No edit summary |
||
| Line 1: | Line 1: | ||
{{Repair Guide | {{Repair Guide | ||
|Device=Raspberry Pi | |Device=Raspberry Pi | ||
|Affects parts= | |Affects parts=Main Logic Board | ||
|Needs equipment= | |Needs equipment=multimeter, soldering iron, soldering station | ||
|Type= | |Type=Soldering | ||
|Difficulty= | |Difficulty=3. Hard | ||
}} | }} | ||
{{stub}} | |||
==Problem description== | ==Problem description== | ||
Raspberry Pi issues with powering on, not staying powered on, randomly power cycles, or the red power LED flickers. | Raspberry Pi issues with powering on, not staying powered on, randomly power cycles, or the red power LED flickers. | ||
Latest revision as of 20:52, 13 January 2024
| Raspberry Pi Power Issues Repair | |
|---|---|
| Device | Raspberry Pi |
| Affects part(s) | Main Logic Board |
| Needs equipment | multimeter, soldering iron, soldering station |
| Difficulty | ◉◉◉◌ Hard |
| Type | Soldering |
This article is a stub. You can help Repair Wiki grow by expanding it
Problem description
Raspberry Pi issues with powering on, not staying powered on, randomly power cycles, or the red power LED flickers.
- Pi 1 (A+ and B+)
- Pi 2 (all)
- Pi 3 (B only)
- Pi Zero (all)
Symptoms
Power issues like the following:
- System doesn't turn on or turns off immediately after turning on
- System runs fine for 10 minutes, then turns off and won't turn on again for some time.
- Red PWR LED flickers or turns off completely (if present)
- 5V present at GPIO 2, but no 3.3V on GPIO 1