More actions
HaileyKitty (talk | contribs) (Created from migrating) |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
{{Repair Guide | {{Repair Guide | ||
|Device=Nintendo Switch | |Device=Nintendo Switch | ||
|Affects parts= | |Affects parts=Whole board | ||
|Needs equipment= | |Needs equipment=multimeter, soldering iron, soldering station | ||
|Type= | |Type=Soldering | ||
|Difficulty= | |Difficulty=3. Hard | ||
}} | }} | ||
{{stub}} | |||
==Problem description== | ==Problem description== | ||
Fixing an issue where the Switch draws 0.00a from charger or bench PSU | |||
[[File:Placeholder image.jpg|thumb|Example image (Figure 1) -- No image yet. Help expand this page by uploading it!]] | [[File:Placeholder image.jpg|thumb|Example image (Figure 1) -- No image yet. Help expand this page by uploading it!]] | ||
==Symptoms== | ==Symptoms== | ||
* | *0mA power draw | ||
==Solution== | ==Solution== | ||
Port, Port Fuse, M92T36, or PI3USB and right most (in readable orientation) Filter, BQ24193. | |||
Measure/check all of those and replace as necessary. | |||
Latest revision as of 16:46, 13 January 2024
| Nintendo Switch Draws 0.00a Repair | |
|---|---|
| Device | Nintendo Switch |
| Affects part(s) | Whole board |
| Needs equipment | multimeter, soldering iron, soldering station |
| Difficulty | ◉◉◉◌ Hard |
| Type | Soldering |
This article is a stub. You can help Repair Wiki grow by expanding it
Problem description
Fixing an issue where the Switch draws 0.00a from charger or bench PSU
Symptoms
- 0mA power draw
Solution
Port, Port Fuse, M92T36, or PI3USB and right most (in readable orientation) Filter, BQ24193.
Measure/check all of those and replace as necessary.