How to fix iPhone X with No Display or No Image: Difference between revisions

From Repair Wiki
(Created page with "{{stub}} {{Repair Guide |Device= |Affects parts= |Needs equipment= |Type= |Difficulty= }} ==Problem description== Provide a concise description of the issue here. Be as specific as possible to help readers quickly determine whether or not this is the exact problem they are facing. thumb|Example image (Figure 1) -- No image yet. Help expand this page by uploading it! ==Symptoms== Detail all measurable or observable symptoms in this section...")
 
(iPhone X No Image Solution)
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
{{stub}}
{{Repair Guide
{{Repair Guide
|Device=
|Device=iPhone X
|Affects parts=
|Affects parts=Main Logic Board
|Needs equipment=
|Needs equipment=Soldering Iron, Hot Air Station, Microscope
|Type=
|Type=BGA, Soldering
|Difficulty=
|Difficulty=3. Hard
}}
}}
==Problem description==
==Problem description==
Provide a concise description of the issue here. Be  as specific as possible to help readers quickly determine whether or not this is the exact problem they are facing.
How to fix an iPhone X with No Image or No Display. Sometimes it is referred to as "No Backlight" although iPhone X uses an OLED screen, so there's no backlight.
[[File:Placeholder image.jpg|thumb|Example image (Figure 1) -- No image yet. Help expand this page by uploading it!]]
[[File:Placeholder image.jpg|thumb|Example image (Figure 1) -- No image yet. Help expand this page by uploading it!]]
==Symptoms==
==Symptoms==


Detail all measurable or observable symptoms in this section.  
* Phone turns on but nothing displays on the screen
* Screen always stays black
* You can hear sounds & feel vibrations.


*Symptom 1 (Figure 1)
==Solution==
*Symptom 2


==Solution==
* Diode mode the display connector (J5700) & check for any shorts or OL (Open Lines).
If the issue has a single, specific solution, provide it in this section and delete the sub-headers below. Otherwise, if there are multiple potential causes for the problem, outline the process of identifying the root cause and offer corresponding solutions below.


===Diagnostic Steps===
* In most cases, you'll find PP3V0_DISPLAY_CONN filter FL5783 is blown & needs to be replaced.


* In other cases, you may find one or more of the 5 chokes L5700, L5710, L5730, L5740 or L5720 is damaged or broken from pry damage


===Repair Steps===
* In rare cases, you may discover there is long screw damage in the screw hole next to the battery connector, which will sever image lines from the chokes mentioned above.

Latest revision as of 06:41, 22 May 2024

How to fix iPhone X with No Display or No Image
Device iPhone X
Affects part(s) Main Logic Board
Needs equipment Soldering Iron, Hot Air Station, Microscope
Difficulty ◉◉◉◌ Hard
Type BGA, Soldering


Problem description

How to fix an iPhone X with No Image or No Display. Sometimes it is referred to as "No Backlight" although iPhone X uses an OLED screen, so there's no backlight.

Example image (Figure 1) -- No image yet. Help expand this page by uploading it!

Symptoms

  • Phone turns on but nothing displays on the screen
  • Screen always stays black
  • You can hear sounds & feel vibrations.

Solution

  • Diode mode the display connector (J5700) & check for any shorts or OL (Open Lines).
  • In most cases, you'll find PP3V0_DISPLAY_CONN filter FL5783 is blown & needs to be replaced.
  • In other cases, you may find one or more of the 5 chokes L5700, L5710, L5730, L5740 or L5720 is damaged or broken from pry damage
  • In rare cases, you may discover there is long screw damage in the screw hole next to the battery connector, which will sever image lines from the chokes mentioned above.