View source for A2992 Stuck on 5V and 0.02A Current Draw

{{Repair Guide
|Device=MacBook Pro A2992
|Type=Soldering, Teardown, Cleaning
}}
{{stub}}

== Problem description ==
<!-- 
Macbook stuck at 5V on the USB C charger and low current draw 0.02a.  
 -->


[[File:Placeholder image.jpg|thumb|Example image (Figure 1) -- No image yet. Help expand this page by uploading it!]]
== Symptoms ==

* USB Ammeter stuck at 5V
* PPBUS_AON Present
* No Magsafe Charging Light
* No Power

== Solution ==
Liquid damage around C7762 pulling down PP1V8_AWAKE_SEPROM_LDO.

=== Diagnostic Steps ===

Check USB C Ammeter stuck at 5V and low current draw

Check if PPBUS_AON and PP3V8_AON are present

Proceed to visual inspection of area around C7762 for corrosion
=== Repair Steps ===
Clean area around C7762 of corrosion

Remove or replace any shorted caps around C7762

Test and repair any corroded traces.