Sony WH-1000XM3 Headphones Charging but Not Turning On Repair: Difference between revisions
From Repair Wiki
KevinShort (talk | contribs) (Created page with "{{stub}} {{Repair Guide |Device= |Affects parts= |Needs equipment= |Type= |Difficulty= }} ==Problem description== How to fix Sony WH-1000XM3 headphones that will not turn on. thumb|Example image (Figure 1) -- No image yet. Help expand this page by uploading it! ==Symptoms== *Will not power on but appears to charge (red charging light comes on and stays lit). ==Solution== * Use a multimeter to check the battery. Battery should read betwee...") |
KevinShort (talk | contribs) m (KevinShort moved page Sony WH-1000XM3 Charging but Not Turning On Repair to Sony WH-1000XM3 Headphones Charging but Not Turning On Repair: added headphones to the title) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
{{Repair Guide | {{Repair Guide | ||
|Device= | |Device=WH-1000XM3 | ||
|Affects parts= | |Affects parts=Main board | ||
|Needs equipment= | |Needs equipment=screwdrivers, pry tool, soldering equipment | ||
|Type= | |Type=Soldering | ||
|Difficulty= | |Difficulty=3. Hard | ||
}} | }} | ||
{{stub}} | |||
==Problem description== | ==Problem description== | ||
How to fix Sony WH-1000XM3 headphones that will not turn on. | How to fix Sony WH-1000XM3 headphones that will not turn on. | ||
Latest revision as of 02:13, 23 January 2024
| Sony WH-1000XM3 Headphones Charging but Not Turning On Repair | |
|---|---|
| Device | WH-1000XM3 |
| Affects part(s) | Main board |
| Needs equipment | screwdrivers, pry tool, soldering equipment |
| Difficulty | ◉◉◉◌ Hard |
| Type | Soldering |
This article is a stub. You can help Repair Wiki grow by expanding it
Problem description
How to fix Sony WH-1000XM3 headphones that will not turn on.
Symptoms
- Will not power on but appears to charge (red charging light comes on and stays lit).
Solution
- Use a multimeter to check the battery. Battery should read between 3.7v and 4.2v. If it's outside of this range, replace battery with another one.
- Check connections, check unit for signs of water damage.
- Assuming all the above stuff is good, you have a dead L_MAIN board, replace L_MAIN board. The service manual says you can't but you can. Just make sure you solder all wires in the correct order.