Miniware ES120 Screen is on and shows the screw not turning once the motor stops turning repair

From Repair Wiki
Revision as of 14:25, 4 February 2024 by ASRepairs (talk | contribs) (Created page with "{{stub}} {{Repair Guide |Device= |Affects parts= |Needs equipment= |Type= |Difficulty= }} ==Problem description== Fixing an issue with the ES120 screwdriver where the screen is on and shows the screw not turning once the motor stops turning. Releasing and repressing the button will cause the driver to work again for ~1 second before stalling again. thumb|Example image (Figure 1) -- No image yet. Help expand this page by uploading it! ==Symp...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

This article is a stub. You can help Repair Wiki grow by expanding it

Miniware ES120 Screen is on and shows the screw not turning once the motor stops turning repair
Device
Affects part(s)
Needs equipment
Difficulty
Type


Problem description

Fixing an issue with the ES120 screwdriver where the screen is on and shows the screw not turning once the motor stops turning. Releasing and repressing the button will cause the driver to work again for ~1 second before stalling again.

Example image (Figure 1) -- No image yet. Help expand this page by uploading it!

Symptoms

  • Stalling motor

Solution

Replace motor with part P14354-ND or equivalent motor. Remove the original pinion gear with a soldering iron at 260+C to burn away previous loctite.

Retrieved from "https://repair.wiki/index.php?title=Miniware_ES120_Screen_is_on_and_shows_the_screw_not_turning_once_the_motor_stops_turning_repair&oldid=3326"