Miniware ES120 Screen is on and shows the screw not turning once the motor stops turning repair: Difference between revisions
From Repair Wiki
(Created page with "{{stub}} {{Repair Guide |Device= |Affects parts= |Needs equipment= |Type= |Difficulty= }} ==Problem description== Fixing an issue with the ES120 screwdriver where the screen is on and shows the screw not turning once the motor stops turning. Releasing and repressing the button will cause the driver to work again for ~1 second before stalling again. thumb|Example image (Figure 1) -- No image yet. Help expand this page by uploading it! ==Symp...") |
(No difference)
|
Revision as of 14:25, 4 February 2024
This article is a stub. You can help Repair Wiki grow by expanding it
| Miniware ES120 Screen is on and shows the screw not turning once the motor stops turning repair | |
|---|---|
| Device | |
| Affects part(s) | |
| Needs equipment | |
| Difficulty | |
| Type | |
Problem description
Fixing an issue with the ES120 screwdriver where the screen is on and shows the screw not turning once the motor stops turning. Releasing and repressing the button will cause the driver to work again for ~1 second before stalling again.
Symptoms
- Stalling motor
Solution
Replace motor with part P14354-ND or equivalent motor. Remove the original pinion gear with a soldering iron at 260+C to burn away previous loctite.