View source for Miniware ES120 Screen is on and shows the screw not turning once the motor stops turning repair

{{Repair Guide
|Device=Miniware ES120
|Affects parts=Motor
|Needs equipment=Screwdrivers, known good parts, soldering iron
|Type=Soldering
|Difficulty=3. Hard
}}
{{stub}}

==Problem description==
Fixing an issue with the ES120 screwdriver where the screen is on and shows the screw not turning once the motor stops turning. Releasing and repressing the button will cause the driver to work again for ~1 second before stalling again.
[[File:Placeholder image.jpg|thumb|Example image (Figure 1) -- No image yet. Help expand this page by uploading it!]]
==Symptoms==

*Stalling motor

==Solution==
Replace motor with part [https://www.digikey.com/en/products/detail/nmb-technologies-corporation/M1N10FB11G/2417078?s=N4IgTCBcDaIAoEYAsBmArEgtAOQCIgF0BfIA P14354-ND] or equivalent motor. Remove the original pinion gear with a soldering iron at 260+C to burn away previous loctite.