MacBook Pro A1990 Not turning on, drawing 0.11A at 20V repair: Difference between revisions
From Repair Wiki
(Created page with "{{stub}} {{Repair Guide |Device= |Affects parts= |Needs equipment= |Type= |Difficulty= }} ==Problem description== A1990 MacBook not turning on and only drawing 0.11A at 20V thumb|Example image (Figure 1) -- No image yet. Help expand this page by uploading it! ==Symptoms== *MacBook not turning on *current draw of 0.11A at 20V as shown by USB-C meter ==Solution== PP2V5_NAND_SSD0 can be shorted (in this case, PPBUS_G3H luckily didn't go to S...") |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
{{Repair Guide | {{Repair Guide | ||
|Device= | |Device=MacBook Pro A1990 | ||
|Affects parts= | |Affects parts=Motherboard | ||
|Needs equipment= | |Needs equipment=multimeter, soldering iron, soldering station, thermal camera | ||
|Type= | |Type=Soldering | ||
|Difficulty= | |Difficulty=3. Hard | ||
}} | }} | ||
{{stub}} | |||
==Problem description== | ==Problem description== | ||
A1990 MacBook not turning on and only drawing 0.11A at 20V | A1990 MacBook not turning on and only drawing 0.11A at 20V | ||
Latest revision as of 15:26, 29 October 2023
| MacBook Pro A1990 Not turning on, drawing 0.11A at 20V repair | |
|---|---|
| Device | MacBook Pro A1990 |
| Affects part(s) | Motherboard |
| Needs equipment | multimeter, soldering iron, soldering station, thermal camera |
| Difficulty | ◉◉◉◌ Hard |
| Type | Soldering |
This article is a stub. You can help Repair Wiki grow by expanding it
Problem description
A1990 MacBook not turning on and only drawing 0.11A at 20V
Symptoms
- MacBook not turning on
- current draw of 0.11A at 20V as shown by USB-C meter
Solution
PP2V5_NAND_SSD0 can be shorted (in this case, PPBUS_G3H luckily didn't go to SSD)
I replaced SSD buck converter but the short was still there, found a shorted cap on the other side of the board C9088 which relieved the short on PP2V5_NAND_SSD0