View source for MacBook Pro A1990 Not turning on, drawing 0.11A at 20V repair

{{stub}}
{{Repair Guide
|Device=
|Affects parts=
|Needs equipment=
|Type=
|Difficulty=
}}
==Problem description==
A1990 MacBook not turning on and only drawing 0.11A at 20V
[[File:Placeholder image.jpg|thumb|Example image (Figure 1) -- No image yet. Help expand this page by uploading it!]]
==Symptoms==

*MacBook not turning on
*current draw of 0.11A at 20V as shown by USB-C meter

==Solution==
PP2V5_NAND_SSD0 can be shorted (in this case, PPBUS_G3H luckily didn't go to SSD)

I replaced SSD buck converter but the short was still there, found a shorted cap on the other side of the board C9088 which relieved the short on PP2V5_NAND_SSD0