MacBook Pro A1708 Not turning on, pulling 2.1A at 20V repair | |
---|---|
Device | MacBook Pro A1708 |
Affects part(s) | Motherboard |
Needs equipment | multimeter, soldering iron, soldering station |
Difficulty | ◉◉◉◌ Hard |
Type | Soldering, Micro-Soldering"Micro-Soldering" is not in the list (Soldering, Teardown, Part replacement, Cleaning, Software, BGA, General) of allowed values for the "Repair Guide type" property. |
This article is a stub. You can help Repair Wiki grow by expanding it
Problem description
#incomplete
Symptoms
- MacBook not turning on
- Pulling 2.1A at 20V as measured by a USB-C meter
Solution
U7100, PROG1 250 Ω short – replace U7100.