MacBook Pro A1708 Not turning on, pulling 2.1A at 20V repair: Difference between revisions

From Repair Wiki
No edit summary
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
{{stub}}
{{Repair Guide
{{Repair Guide
|Device=
|Device=MacBook Pro A1708
|Affects parts=
|Affects parts=Motherboard
|Needs equipment=
|Needs equipment=multimeter, soldering iron, soldering station
|Type=
|Type=Soldering
|Difficulty=
|Difficulty=3. Hard
}}
}}
{{stub}}
==Problem description==
==Problem description==
<nowiki>#</nowiki>incomplete
<nowiki>#</nowiki>incomplete

Latest revision as of 15:21, 29 October 2023

MacBook Pro A1708 Not turning on, pulling 2.1A at 20V repair
Device MacBook Pro A1708
Affects part(s) Motherboard
Needs equipment multimeter, soldering iron, soldering station
Difficulty ◉◉◉◌ Hard
Type Soldering


This article is a stub. You can help Repair Wiki grow by expanding it

Problem description

#incomplete

Example image (Figure 1) -- No image yet. Help expand this page by uploading it!

Symptoms

  • MacBook not turning on
  • Pulling 2.1A at 20V as measured by a USB-C meter

Solution

U7100, PROG1 250 Ω short – replace U7100.