MacBook Pro A1708 Not turning on, pulling 0.35A at 20V repair: Difference between revisions
From Repair Wiki
No edit summary |
No edit summary |
||
| Line 3: | Line 3: | ||
|Affects parts=Motherboard | |Affects parts=Motherboard | ||
|Needs equipment=multimeter, soldering iron, soldering station, thermal camera | |Needs equipment=multimeter, soldering iron, soldering station, thermal camera | ||
|Type= | |Type=Soldering | ||
|Difficulty=3. Hard | |Difficulty=3. Hard | ||
}} | }} | ||
Latest revision as of 15:21, 29 October 2023
| MacBook Pro A1708 Not turning on, pulling 0.35A at 20V repair | |
|---|---|
| Device | MacBook Pro A1708 |
| Affects part(s) | Motherboard |
| Needs equipment | multimeter, soldering iron, soldering station, thermal camera |
| Difficulty | ◉◉◉◌ Hard |
| Type | Soldering |
This article is a stub. You can help Repair Wiki grow by expanding it
Problem description
#incomplete
Provide a concise description of the issue here. Be as specific as possible to help readers quickly determine whether or not this is the exact problem they are facing.
Symptoms
- Not turning on
- Pulling 350 milliamps at 20V as measured by a USB-C meter
Solution
PP5V_S5 missing — check and reflow or replace U7650 (TPS51980) with proper pads cleaning (especially on the PPBUS_G3H_P3V3S5 input of U7650). Possible problem: Apple refurbished board; solder over corrosion causing bad joint. Example of replacing a corroded TPS51980
Dead CPU or bad BIOS can also present like this.