More actions
| MacBook Pro A1708 Not turning on, pulling 0.02A at 5V repair | |
|---|---|
| Device | MacBook Pro A1708 |
| Affects part(s) | Motherboard |
| Needs equipment | multimeter, soldering iron, soldering station |
| Difficulty | ◉◉◉◌ Hard |
| Type | Soldering |
This article is a stub. You can help Repair Wiki grow by expanding it
Problem description
No Power, 5v and ~0.02A current draw on the A1708 MacBook diagnosis and repair.
Symptoms
- Not turning on
- Charger stuck at 5V with a current draw of 20 milliamps as measured by a USB-C meter
Solution
Remove the shield over U2800 (Figure 1), clean and inspect all components around it, reflow if necessary.