MacBook Pro A1707 All charging ports boot looping repair: Difference between revisions

From Repair Wiki
(Created page with "{{stub}} {{Repair Guide |Device= |Affects parts= |Needs equipment= |Type= |Difficulty= }} ==Problem description== <nowiki>#</nowiki>incomplete thumb|Example image (Figure 1) -- No image yet. Help expand this page by uploading it! ==Symptoms== *Symptom 1 (Figure 1) *Symptom 2 ==Solution== SOC_SWCLK_DBG signal missing, this required a small jumper wire under U3200")
 
No edit summary
 
Line 1: Line 1:
{{stub}}
{{Repair Guide
{{Repair Guide
|Device=
|Device=MacBook Pro A1707
|Affects parts=
|Affects parts=Motherboard
|Needs equipment=
|Needs equipment=multimeter, soldering iron, soldering station
|Type=
|Type=Soldering
|Difficulty=
|Difficulty=3. Hard
}}
}}
{{stub}}
==Problem description==
==Problem description==
<nowiki>#</nowiki>incomplete
<nowiki>#</nowiki>incomplete

Latest revision as of 16:15, 29 October 2023

MacBook Pro A1707 All charging ports boot looping repair
Device MacBook Pro A1707
Affects part(s) Motherboard
Needs equipment multimeter, soldering iron, soldering station
Difficulty ◉◉◉◌ Hard
Type Soldering


This article is a stub. You can help Repair Wiki grow by expanding it

Problem description

#incomplete

Example image (Figure 1) -- No image yet. Help expand this page by uploading it!

Symptoms

  • Symptom 1 (Figure 1)
  • Symptom 2

Solution

SOC_SWCLK_DBG signal missing, this required a small jumper wire under U3200