This article is a stub. You can help Repair Wiki grow by expanding it
MacBook Pro A1502 Not turning on (80 mA current draw) repair | |
---|---|
Device | |
Affects part(s) | |
Needs equipment | |
Difficulty | |
Type |
Problem description
#incomplete
Symptoms
- Not turning on.
- Only drawing 80 mA from the charge port.
Solution
Corrosion at U5400 current sensing (R5400) circuit PP3V3_SO_HS_COMPUTING. This device makes power for the stages of CPU_VCORE. U5400 signals the SMC.
- Corrosion for U5400 was removed.
- Jumper wires were added to replace the faulty traces at U5400.
- U5400 and current sense resister restored.
- U7400 (Voltage regulator) chip was replaced and surrounding circuitry restored.
- Backlight circuitry and other areas cleaned up (corrosion).