IPad Pro 12.9 No touch after screen replacement repair

From Repair Wiki
Revision as of 01:20, 18 January 2024 by KevinShort (talk | contribs) (Created page with "{{stub}} {{Repair Guide |Device= |Affects parts= |Needs equipment= |Type= |Difficulty= }} ==Problem description== Fixing an iPad Pro 12.9 that no longer responds to touch input after a screen replacement / device disassembly. thumb|Example image (Figure 1) -- No image yet. Help expand this page by uploading it! ==Symptoms== *Non-working touch ==Solution== If there is no touch after attempting a screen replacement with a known-good screen,...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

This article is a stub. You can help Repair Wiki grow by expanding it

IPad Pro 12.9 No touch after screen replacement repair
Device
Affects part(s)
Needs equipment
Difficulty
Type


Problem description

Fixing an iPad Pro 12.9 that no longer responds to touch input after a screen replacement / device disassembly.

Example image (Figure 1) -- No image yet. Help expand this page by uploading it!

Symptoms

  • Non-working touch

Solution

If there is no touch after attempting a screen replacement with a known-good screen, most likely the screen was connected/disconnected with the battery plugged into the board. This can result in a blown touch filter on the far end of one of the display connectors. Replacement of this component will often times resolve touch issues.

Retrieved from "https://repair.wiki/index.php?title=IPad_Pro_12.9_No_touch_after_screen_replacement_repair&oldid=3033"