IPad Pro 12.9 No touch after screen replacement repair: Difference between revisions
From Repair Wiki
KevinShort (talk | contribs) (Created page with "{{stub}} {{Repair Guide |Device= |Affects parts= |Needs equipment= |Type= |Difficulty= }} ==Problem description== Fixing an iPad Pro 12.9 that no longer responds to touch input after a screen replacement / device disassembly. thumb|Example image (Figure 1) -- No image yet. Help expand this page by uploading it! ==Symptoms== *Non-working touch ==Solution== If there is no touch after attempting a screen replacement with a known-good screen,...") |
KevinShort (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
{{Repair Guide | {{Repair Guide | ||
|Device= | |Device=IPad Pro 12.9 1st Gen, iPad Pro 12.9 2nd Gen | ||
|Affects parts= | |Affects parts=motherboard | ||
|Needs equipment= | |Needs equipment=soldering iron | ||
|Type= | |Type=Soldering | ||
|Difficulty= | |Difficulty=3. Hard | ||
}} | }} | ||
{{stub}} | |||
==Problem description== | ==Problem description== | ||
Fixing an iPad Pro 12.9 that no longer responds to touch input after a screen replacement / device disassembly. | Fixing an iPad Pro 12.9 that no longer responds to touch input after a screen replacement / device disassembly. | ||
Revision as of 01:24, 18 January 2024
| IPad Pro 12.9 No touch after screen replacement repair | |
|---|---|
| Device | IPad Pro 12.9 1st Gen, iPad Pro 12.9 2nd Gen |
| Affects part(s) | motherboard |
| Needs equipment | soldering iron |
| Difficulty | ◉◉◉◌ Hard |
| Type | Soldering |
This article is a stub. You can help Repair Wiki grow by expanding it
Problem description
Fixing an iPad Pro 12.9 that no longer responds to touch input after a screen replacement / device disassembly.
Symptoms
- Non-working touch
Solution
If there is no touch after attempting a screen replacement with a known-good screen, most likely the screen was connected/disconnected with the battery plugged into the board. This can result in a blown touch filter on the far end of one of the display connectors. Replacement of this component will often times resolve touch issues.