View source for IPad Pro 11 Not turning on, drawing no current with little ticking noise repair

{{Repair Guide
|Device=IPad Pro 11in 1st Gen
|Affects parts=Main Logic Board
|Needs equipment=multimeter, soldering iron, soldering station
|Type=Soldering
|Difficulty=3. Hard
}}
{{stub}}

==Problem description==
Solving an issue where the iPad 11" 1st gen is not turning on with ticking noise. 
[[File:Placeholder image.jpg|thumb|C3800 (Figure 1)]]
==Symptoms==

*Ticking noise
*Drawing 0A (no current)
*Not turning on

==Solution==
This specific problem was traced to a shorted line on PMIC/CD3217. The culprit was a shorted cap C3800 (Figure 1).

It could also be one (or both) the 2 "middle pins connecting from the board to the battery (clk and dat0) that could have been damaged when the battery gets lifted, just make a straight jumper from the motherboard to the battery and that will solve the issue.