Hewlett Packard Pavilion 22xi Overheats and Powers Off Repair: Difference between revisions
From Repair Wiki
HaileyKitty (talk | contribs) (Created from migrating) |
No edit summary |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
{{Repair Guide | {{Repair Guide | ||
|Device=Hewlett Packard Pavilion 22xi | |Device=Hewlett Packard Pavilion 22xi | ||
|Affects parts=Logic Board | |Affects parts=Logic Board | ||
|Needs equipment= | |Needs equipment=multimeter, soldering iron, soldering station | ||
|Type= | |Type=Soldering | ||
|Difficulty= | |Difficulty=3. Hard | ||
}} | }} | ||
{{stub}} | |||
==Problem description== | ==Problem description== | ||
Monitor work for some time, a few minutes then it turns off and can | Monitor work for some time, a few minutes then it turns off and can't be power on unless it cools down.[[File:Placeholder image.jpg|thumb|Example image (Figure 1) -- No image yet. Help expand this page by uploading it!]] | ||
==Symptoms== | ==Symptoms== | ||
| Line 15: | Line 16: | ||
==Solution== | ==Solution== | ||
* Replace eeprom (25xx), now don | * Replace eeprom (25xx), now don't use same one, use from another manufacturer, when you remove the old eeprom you have to read it (dump its contents) write that content in another eeprom and put it back in its place. The problem with this monitor is that the eeprom has a problem, it stops working when it heats up, the problem is in the eeprom. | ||
Latest revision as of 12:30, 14 January 2024
| Hewlett Packard Pavilion 22xi Overheats and Powers Off Repair | |
|---|---|
| Device | Hewlett Packard Pavilion 22xi |
| Affects part(s) | Logic Board |
| Needs equipment | multimeter, soldering iron, soldering station |
| Difficulty | ◉◉◉◌ Hard |
| Type | Soldering |
This article is a stub. You can help Repair Wiki grow by expanding it
Problem description
Monitor work for some time, a few minutes then it turns off and can't be power on unless it cools down.
Symptoms
- Overheats then powers off
Solution
- Replace eeprom (25xx), now don't use same one, use from another manufacturer, when you remove the old eeprom you have to read it (dump its contents) write that content in another eeprom and put it back in its place. The problem with this monitor is that the eeprom has a problem, it stops working when it heats up, the problem is in the eeprom.