View source for GTX 970 Jetstream Fan Spin, no image and core not heating up repair

{{Repair Guide
|Device=GTX 970
|Affects parts=Whole board
|Needs equipment=multimeter, soldering iron, soldering station
|Type=Soldering
|Difficulty=3. Hard
}}
{{stub}}

==Problem description==
Repairing of a likely short on 12V which blew the corresponding fuse on a Jetstream GTX 970.
[[File:Placeholder image.jpg|thumb|Example image (Figure 1) -- No image yet. Help expand this page by uploading it!]]
==Symptoms==

*Not turning on
*No fan spin
*Not detected
*All voltages missing

==Solution==
Most likely a problem with a VRM, check if any of the 3 fuses (AF2-10.0V125TM, colored brown, about 6x2.5x2mm and have a capital letter printed on them) are broken. The fuse is most likely broken due to a failure of a mosfet chip, however less likely but still possible, failures of any of the surrounding capacitors/ resistors. A deteriorated thermal pad, causing the aluminum heatsink to short the SMD capacitors is also a possible cause.

[https://www.youtube.com/watch?v=ai8s0Ne8vf8&ab Example video]: (Aluminum short & failed mosfet/inductor)