Avatar Whoop VTX: Difference between revisions

Latest revision as of 22:45, 16 January 2024

This article is a stub. You can help Repair Wiki grow by expanding it

The Avatar VTX is designed to be used with the Fat Shark Dominator, Walksnail Avatar HD FPV Goggles and Caddx Goggles X.

1080P/60FPS,720P/120FPS

22ms low latency

3.1V-5V

RF Power 350mW,

Built-in 8G storage

6.8g light weight

@@ Line 1: / Line 1: @@
 {{stub}}
-The Avatar VTX is designed to be used with the Fat Shark Dominator, Walksnail Avatar HD FPV Goggles and Caddx Goggles X.
+{{Device page
-P/60FPS,720P/120FPS
-ms low latency
-.1V-5V
-RF Power 350mW,
-Built-in 8G storage
-.8g light weight{{Device page
 |Manufacturer=Walksnail|Device type=Drone}}
@@ Line 27: / Line 15: @@
 File:Avatar Whoop 1S VTX Top.jpg|Avatar Whoop 1S VTX V1
 File:Avatar Whoop 1S VTX Bottom.jpg|Avatar Whoop 1S VTX V1
-File:Avatar HD Race VTX PCB Top.jpg|Avatar Whoop 1S VTX V2
+File:Walksnail Avatar Whoop VTX V2 Top (1).jpg|Avatar Whoop 1S VTX V2
-File:Avatar Race VTX PCB Bottom.jpg|Avatar Whoop 1S VTX V2
+File:Walksnail Avatar Whoop VTX V2 Bottom.jpg|Avatar Whoop 1S VTX V2
 </gallery>
 ==Reference measurements (also schematics if available)==
 <gallery showthumbnails="1">
-File:Example measurement pictures.jpg
+File:Walksnail Avatar Whoop VTX USB.jpg
+File:Avatar Whoop VTX Top Testing.jpg
 </gallery>
 ==More Information/External Sources==
-You can manually link to external sources for additional information that might not fit here but are useful such as BIOS image dumps, firmware, etc!
+The Avatar VTX is designed to be used with the Fat Shark Dominator, Walksnail Avatar HD FPV Goggles and Caddx Goggles X.
+P/60FPS,720P/120FPS
+ms low latency
+.1V-5V
+RF Power 350mW,
+Built-in 8G storage
+.8g light weight