(Created page with "{{stub}} {| class="wikitable" |Model |Avatar HD Mini VTX V3 |- |Communication Frequency |5.725-5.850GHz |- |Transmitter Power (EIRP) |FCC:<27dBm;CE:<14dBm;SRRC:<20dBm; MIC:<25dBm |- |I/O Interface |JST1.0*4(Power in)JST0.8*4(USB) |- |Mounting Holes |25.5*25.5mm(M2 hole);20*20mm(M3 hole) |- |Dimensions |31.5*31.5*9.4mm |- |Storage |32G |- |Recording |1080p/720p |- |Weight |13.4g |- |Operating Temperature | -20-40℃ |- |Channels |8 |- |Wide Power Input |3.1V-13V |- |Suppo...") |
mNo edit summary |
||
| Line 1: | Line 1: | ||
{{stub}} | {{stub}} | ||
The Avatar VTX is designed to be used with the Fat Shark Dominator, Walksnail Avatar HD FPV Goggles and Caddx Goggles X. | |||
{| class="wikitable" | {| class="wikitable" | ||
|Model | |Model | ||
Revision as of 22:23, 16 January 2024
This article is a stub. You can help Repair Wiki grow by expanding it
The Avatar VTX is designed to be used with the Fat Shark Dominator, Walksnail Avatar HD FPV Goggles and Caddx Goggles X.
| Model | Avatar HD Mini VTX V3 |
| Communication Frequency | 5.725-5.850GHz |
| Transmitter Power (EIRP) | FCC:<27dBm;CE:<14dBm;SRRC:<20dBm;
MIC:<25dBm |
| I/O Interface | JST1.0*4(Power in)JST0.8*4(USB) |
| Mounting Holes | 25.5*25.5mm(M2 hole);20*20mm(M3 hole) |
| Dimensions | 31.5*31.5*9.4mm |
| Storage | 32G |
| Recording | 1080p/720p |
| Weight | 13.4g |
| Operating Temperature | -20-40℃ |
| Channels | 8 |
| Wide Power Input | 3.1V-13V |
| Supported FC System | Betaflight; Inav; Fettec; Kiss; ArduPliot |
| OSD | Canvas mode |
| Latency | Average latency 22ms |
| Antenna | 1(IPEX) |
| Avatar Race VTX | |
|---|---|
| Manufacturer | Walksnail |
| Code name | |
| Release date | |
| Device type | Drone |
Guides
Explanatory Guides
Repair Guides
Device pictures
PCB pictures
Reference measurements (also schematics if available)
More Information/External Sources
You can manually link to external sources for additional information that might not fit here but are useful such as BIOS image dumps, firmware, etc!