Avatar HD VTX: Difference between revisions

Latest revision as of 22:45, 16 January 2024

This article is a stub. You can help Repair Wiki grow by expanding it

Manufacture: https://walksnail.com/

The Avatar VTX is designed to be used with the Fat Shark Dominator, Walksnail Avatar HD FPV Goggles and Caddx Goggles X.

@@ Line 1: / Line 1: @@
 {{stub}}
-Manufacture: <nowiki>https://walksnail.com/</nowiki>
-The Avatar VTX is designed to be used with the Fat Shark Dominator and Walksnail Avatar HD FPV Goggles.{{Device page
+{{Device page
-|Manufacturer=Walksnail|Device type=Drones}}
+|Manufacturer=Walksnail|Device type=Drone}}
 ==Guides==
@@ Line 15: / Line 14: @@
 ==PCB pictures==
 <gallery showthumbnails="1">
-File:Example pcb pictures.jpg
+File:Walsnail Avatar VTX Top.jpg
+File:Walksnail Avatar VTX Bottom PCB.jpg
 </gallery>
 ==Reference measurements (also schematics if available)==
 <gallery showthumbnails="1">
-File:Example measurement pictures.jpg
+File:Avatar VTX 5V Regulator.jpg
+File:Avatar VTX Uart Repair.jpg
+File:Avatar VTX Dialog DA9062.jpg
+File:Avatar VTX USB Pinout.jpg
 </gallery>
 ==More Information/External Sources==
-You can manually link to external sources for additional information that might not fit here but are useful such as BIOS image dumps, firmware, etc!
+Manufacture: <nowiki>https://walksnail.com/</nowiki>
+The Avatar VTX is designed to be used with the Fat Shark Dominator, Walksnail Avatar HD FPV Goggles and Caddx Goggles X.
+* Lower latency than the competitor at an average of 22ms
+* Built-in 8Gb Internal Storage
+* 1080p Screen Resolution
+* Switchable Aspect Ratio
+* Dual Antenna Design
+* 5.8GHz Frequency
+* Onboard DVR
+* Canvas Mode
+* 4km Range
+* 170° FOV
+* 6V-25.2V