Avatar Goggles X

This article is a stub. You can help Repair Wiki grow by expanding it

The Caddx Goggles X are the replacement for the original Walksnail Avatar HD Goggles.

These new goggles have an all new design, are manufactured by Caddx FPV and feature

Product Features:

• 1080p Oled Displays 50 degree FOV +2 – 6 Diopter
• Upgradable Avatar HD VRX Module with DVR
• Analog Input via 3.5mm Jack ( No Analog DVR Onboard)
• HDMI In & Out 720/1080P 100/60fps.
• Proximity Sensor
• Wifi & Bluetooth
• 7-26v 2-6S Compatible

These goggles are fully compatible with all existing Avatar HD VTX’s with the standard VRX.

Upgradability

The New Goggles X feature an top mounted VRX module accessible with 2 screws. Caddx FPV have stated they intend to release a new upgraded Avatar System and new module for these goggles mid 2024 with improved range (20+km) however compatibly with existing vtx or cost is unknown.

Additional Information

●Weight 290g	●+2 to-6 diopter
●FOV 50°	●Lenses can be replaced
●7-26V	●1PD57~72mm
●Front cover DIY	●Infrared Sensing
●1080P/100FPS	●Sharing mode
●HDMI input	●Replace VRX
●HDMI output	●Built-in Gyro (in development)
●AV in	●Built-in Bluetooth Wi-Fi module (in development）

Avatar Goggles X
Manufacturer	Walksnail
Code name
Release date
Device type	Drone

Guides

Device pictures

• 

PCB pictures

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Reference measurements (also schematics if available)

• 

More Information/External Sources

You can manually link to external sources for additional information that might not fit here but are useful such as BIOS image dumps, firmware, etc!