(Added Images) |
mNo edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
{{stub}} | {{stub}} | ||
{{Device page | {{Device page | ||
|Manufacturer=Walksnail|Device type= | |Manufacturer=Walksnail|Device type=Drone}} | ||
==Guides== | ==Guides== | ||
| Line 80: | Line 34: | ||
==More Information/External Sources== | ==More Information/External Sources== | ||
The Caddx Goggles X are the replacement for the original Walksnail Avatar HD Goggles. | |||
These new goggles have an all new design, are manufactured by Caddx FPV and feature | |||
Product Features: | |||
* 1080p Oled Displays 50 degree FOV +2 – 6 Diopter | |||
* Upgradable Avatar HD VRX Module with DVR | |||
* Analog Input via 3.5mm Jack ( No Analog DVR Onboard) | |||
* HDMI In & Out 720/1080P 100/60fps. | |||
* Proximity Sensor | |||
* Wifi & Bluetooth | |||
* 7-26v 2-6S Compatible | |||
These goggles are fully compatible with all existing Avatar HD VTX’s with the standard VRX. | |||
== Upgradability == | |||
The New Goggles X feature an top mounted VRX module accessible with 2 screws. Caddx FPV have stated they intend to release a new upgraded Avatar System and new module for these goggles mid 2024 with improved range (20+km) however compatibly with existing vtx or cost is unknown. | |||
You can manually link to external sources for additional information that might not fit here but are useful such as BIOS image dumps, firmware, etc! | You can manually link to external sources for additional information that might not fit here but are useful such as BIOS image dumps, firmware, etc! | ||
●Weight 290g | |||
●+2 to-6 diopter | |||
●FOV 50° | |||
●Lenses can be replaced | |||
●7-26V | |||
●1PD57~72mm | |||
●Front cover DIY | |||
●Infrared Sensing | |||
●1080P/100FPS | |||
●Sharing mode | |||
●HDMI input | |||
●Replace VRX | |||
●HDMI output | |||
●Built-in Gyro (in development) | |||
●AV in | |||
●Built-in Bluetooth Wi-Fi module (in development） | |||
Latest revision as of 22:58, 16 January 2024
This article is a stub. You can help Repair Wiki grow by expanding it
| Avatar Goggles X | |
|---|---|
| Manufacturer | Walksnail |
| Code name | |
| Release date | |
| Device type | Drone |
Guides
Explanatory Guides
Repair Guides
Device pictures
PCB pictures
Reference measurements (also schematics if available)
More Information/External Sources
The Caddx Goggles X are the replacement for the original Walksnail Avatar HD Goggles.
These new goggles have an all new design, are manufactured by Caddx FPV and feature
Product Features:
- 1080p Oled Displays 50 degree FOV +2 – 6 Diopter
- Upgradable Avatar HD VRX Module with DVR
- Analog Input via 3.5mm Jack ( No Analog DVR Onboard)
- HDMI In & Out 720/1080P 100/60fps.
- Proximity Sensor
- Wifi & Bluetooth
- 7-26v 2-6S Compatible
These goggles are fully compatible with all existing Avatar HD VTX’s with the standard VRX.
Upgradability
The New Goggles X feature an top mounted VRX module accessible with 2 screws. Caddx FPV have stated they intend to release a new upgraded Avatar System and new module for these goggles mid 2024 with improved range (20+km) however compatibly with existing vtx or cost is unknown.
You can manually link to external sources for additional information that might not fit here but are useful such as BIOS image dumps, firmware, etc!
●Weight 290g
●+2 to-6 diopter
●FOV 50°
●Lenses can be replaced
●7-26V
●1PD57~72mm
●Front cover DIY
●Infrared Sensing
●1080P/100FPS
●Sharing mode
●HDMI input
●Replace VRX
●HDMI output
●Built-in Gyro (in development)
●AV in
●Built-in Bluetooth Wi-Fi module (in development）