Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

MacBook Air A2337 No sound from speakers repair

From Repair Wiki
Revision as of 20:43, 19 September 2023 by ASRepairs (talk | contribs) (Created page with "{{Repair Guide |Device= |Affects parts= |Needs equipment= |Type= |Difficulty= }} {{stub}} ==Problem description== Issue with MacBook Air A2337 not playing sound from speakers.thumb|Example image (Figure 1) -- No image yet. Help expand this page by uploading it! ==Symptoms== *No sound from speakers *Not a software issue ==Solution== ===Diagnostic Steps=== ==== Check SPKRAMP_1V8_RESET_L ==== You should measure 1.8V, if you measure 0 volts,...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
MacBook Air A2337 No sound from speakers repair
Device
Affects part(s)
Needs equipment
Difficulty
Type


This article is a stub. You can help Repair Wiki grow by expanding it

Problem description

Issue with MacBook Air A2337 not playing sound from speakers.

Example image (Figure 1) -- No image yet. Help expand this page by uploading it!

Symptoms

  • No sound from speakers
  • Not a software issue

Solution

Diagnostic Steps

Check SPKRAMP_1V8_RESET_L

You should measure 1.8V, if you measure 0 volts, proceed to the repair steps below.

Repair Steps

No or low SPKRAMP_1V8_RESET_L

  • UR900 is most likely the issue.
  • Run wire from CR901 pin 2 that has 1.8 volts to pin 1 of CE904 this will force SPKRAMP_1V8_RESET_L high and allow speakers to power up.

Note: As of writing I could not find UR900 (SN74AVC4T234) for purchase it is recommended you replace UR900 but this workaround works fine so far assuming UR900 is being told to turn on and SPKRAMP_RESET_L is present.