MacBook Pro A1708 Not turning on, pulling 2.1A at 20V repair: Difference between revisions
From Repair Wiki
More actions
No edit summary |
No edit summary |
||
| Line 3: | Line 3: | ||
|Affects parts=Motherboard | |Affects parts=Motherboard | ||
|Needs equipment=multimeter, soldering iron, soldering station | |Needs equipment=multimeter, soldering iron, soldering station | ||
|Type= | |Type=Soldering | ||
|Difficulty=3. Hard | |Difficulty=3. Hard | ||
}} | }} | ||
Revision as of 15:21, 29 October 2023
| MacBook Pro A1708 Not turning on, pulling 2.1A at 20V repair | |
|---|---|
| Device | MacBook Pro A1708 |
| Affects part(s) | Motherboard |
| Needs equipment | multimeter, soldering iron, soldering station |
| Difficulty | ◉◉◉◌ Hard |
| Type | Soldering |
This article is a stub. You can help Repair Wiki grow by expanding it
Problem description
#incomplete
Symptoms
- MacBook not turning on
- Pulling 2.1A at 20V as measured by a USB-C meter
Solution
U7100, PROG1 250 Ω short – replace U7100.