Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Pixel 6a Vibration and Haptics Not Working and Galaxy A15 5G: Difference between pages

From Repair Wiki
(Difference between pages)
 
 
Line 1: Line 1:
{{Repair Guide
{{Device page
|Device=Pixel 6a
|Manufacturer=Samsung
|Affects parts=Main Logic Board
|Device type=Phone
|Needs equipment=Screwdrivers, known good parts, spudger
|Type=Part replacement
|Difficulty=1. Easy
}}
}}
{{stub}}


'''Pixel 6a Vibration/Haptics Not Working'''


<nowiki>**</nowiki> This guide is anecdotal. My phone now has 100% vibration uptime using this repair. If it worked for you, please update with pictures **
== Guides ==
{{List Guides}}


The device's haptics do not register notifications, button presses, etc. This guide realigns the pins for a better contact between the motherboard and haptics component.
== Device pictures ==
<gallery showthumbnails="1">
</gallery>


🔍 '''Step-by-Step Diagnosis'''
== PCB pictures ==
<gallery showthumbnails="1">
File:2025 05 14 10 03 IMG 7819.JPG|MOTHERBOARD B
File:2025 05 14 10 03 IMG 7818.JPG|MOTHERBOARD A
File:Galaxy A15 5G PCB A156U.jpg|alt=
</gallery>


If your vibration motor is not working, hard reset the phone by holding down the power button + volume up key for 30 secs.
== Reference measurements (also schematics if available) ==
<gallery showthumbnails="1">
File:A15.jpg|Samsung Galaxy A15 Mechanic USB-C Readings
File:MAIN-CONN.png|MAIN B2B CONNECTOR
File:Fcam.png|FRONT CAMERA
File:Main-cam.png|MAIN CAMERA
File:UW-CAM.png|ULTRAWIDE CAMERA
File:Macro.png|MACRO CAMERA
File:Finger.png|FINGERPRINT CONNECTOR
File:Batt conn.png|BATTERY CONNECTOR
</gallery>


If the vibration comes back after reboot and dies later, your device may benefit from this guide.
== More Information/External Sources ==
 
<!--
The vibration motor usually dies after quick key presses. Some users say that it dies when connected to a weak cellular connection.
You can manually link to external sources for additional information that might not fit here but are useful such as BIOS image dumps, firmware, etc!
 
-->
Check for similar kernel logs hinting that the vibration motor is not working
[09-06 20:10:22.074 1222:27231 E/android.hardware.vibrator-cs40l26] Polling error or timeout! (0)
 
[09-06 20:10:41.948 1222:27563 W/Vibrator] Failed to get state "Haptic"
 
[09-06 20:07:05.492 1314:1445 E/NotificationVibratorHelper] Error creating vibration waveform with pattern: [0]
 
[09-06 20:05:03.736 1314:1668 E/VibratorController] Vibrator HAL on failed: Status(-5, EX_ILLEGAL_STATE): <nowiki>''</nowiki>
💡 '''Issue with Vibrator Contacts'''
 
The vibrator is not firmly attached to the motherboard like other "lego" style connectors. The motherboard has spring loaded pins that press against the vibrator module. After time, I believe the contacts lose their elasticity and make a poor connection, causing many kernel errors. After too many errors, I think the phone locks out the vibrator to prevent further damage to other components.
 
 
'''⚙️ Hardware Solution'''
 
# Take off the screen and midframe
# Locate where the vibrator connects to the motherboard. Using narrow tweezers, grab each pin and gently bend it upwards.
# Take out the vibrator module and slightly bend the two pins downwards.
# You should feel some tension when screwing back the midframe as the pins press against each other.
 
💬 '''External Discussion for this Issue'''
 
* https://github.com/GrapheneOS/os-issue-tracker/issues/2414
* https://discuss.grapheneos.org/d/11507-haptic-feedback-randomly-crashes
* https://old.reddit.com/r/GooglePixel/comments/13pfli3/pixel_6a_vibration_stops_working_randomly_comes/

Latest revision as of 22:27, 16 August 2025

Galaxy A15 5G
Manufacturer Samsung
Code name
Release date
Device type Phone


This article is a stub. You can help Repair Wiki grow by expanding it


Guides

Explanatory Guides

 TypeDifficulty
How to use ODIN to flash firmware on Samsung devicesTroubleshooting/Diagnostics

Repair Guides

 Affects partTypeDifficulty
Galaxy A15 5G Does not ChargeMotherboardSoldering3. Hard

Create a Guide

Device pictures

Please consider contributing pictures to this section!

PCB pictures

Reference measurements (also schematics if available)

More Information/External Sources