View source for How to fix iPhone X with No Display or No Image

{{Repair Guide
|Device=iPhone X
|Affects parts=Main Logic Board
|Needs equipment=Soldering Iron, Hot Air Station, Microscope
|Type=BGA, Soldering
|Difficulty=3. Hard
}}
==Problem description==
How to fix an iPhone X with No Image or No Display. Sometimes it is referred to as "No Backlight" although iPhone X uses an OLED screen, so there's no backlight.
[[File:Placeholder image.jpg|thumb|Example image (Figure 1) -- No image yet. Help expand this page by uploading it!]]
==Symptoms==

* Phone turns on but nothing displays on the screen
* Screen always stays black
* You can hear sounds & feel vibrations.

==Solution==

* Diode mode the display connector (J5700) & check for any shorts or OL (Open Lines).

* In most cases, you'll find PP3V0_DISPLAY_CONN filter FL5783 is blown & needs to be replaced.

* In other cases, you may find one or more of the 5 chokes L5700, L5710, L5730, L5740 or L5720 is damaged or broken from pry damage

* In rare cases, you may discover there is long screw damage in the screw hole next to the battery connector, which will sever image lines from the chokes mentioned above.