View source for How To Fix an iPhone 7 That Does Not Turn On, urrent jumps back and forth from 0 A to 320 mA, then 0 A to 1.4 A, then 0 A to 500 mA, and so on

{{Repair Guide
|Device=IPhone 7, IPhone 7 Plus
|Affects parts=Main Logic Board
|Needs equipment=Soldering Iron, Hot Air Station, Microscope
|Type=BGA, Soldering
|Difficulty=3. Hard
}}
{{stub}}

==Problem description==
Provide a concise description of the issue here. Be  as specific as possible to help readers quickly determine whether or not this is the exact problem they are facing.
[[File:Placeholder image.jpg|thumb|Example image (Figure 1) -- No image yet. Help expand this page by uploading it!]]
==Symptoms==

Detail all measurable or observable symptoms in this section. 

*Symptom 1 (Figure 1)
*Symptom 2

==Solution==
If the issue has a single, specific solution, provide it in this section and delete the sub-headers below. Otherwise, if there are multiple potential causes for the problem, outline the process of identifying the root cause and offer corresponding solutions below.

===Diagnostic Steps===


===Repair Steps===