We will be continuing maintenance on the wiki starting this Saturday at 9 am (UTC) to Sunday at 7PM (UTC).
There is a possibility of long maintenance-breaks and downtime during this time.
For more information contact us in the wiki Discord or by email at: unto@fighttorepair.org
A1670/1 2017 12.9” iPad Pro
Jump to navigation
Jump to search
| iPad 12.9 2nd gen Problems | solutions |
|---|---|
| No touch after screen replacement | If there is no touch after attempting a screen replacement with a known good screen, most likely the screen was connected/disconnected with the battery plugged into the board. This most likely has resulted in a blown touch filter on the far end of one of the FPCs. Replacement of this component will often times resolve touch issues. |
| No Backlight after screen replacement | If there is no backlight after a screen replacement, the screen was most likely connected/disconnected with the battery plugged into the board. This most likely has caused one or both of the backlight filters above one of the FPCs to blow. Replacement of these components will often time resolve backlight issues. |